Tampilkan postingan dengan label boats. Tampilkan semua postingan
Tampilkan postingan dengan label boats. Tampilkan semua postingan

Of Camels Boats Dunes and Things

Senin, 15 Februari 2016

0 komentar
We all learn in school about the "ship of the desert", the much maligned camel. These animals and their owners are totally adapted to living on and cruising the undulating surface of the desert. We also know of the traditional boats of the Arab world, the dhows that are seen in both power and sail versions. These are very seaworthy boats and have done extensive voyages.

Not heard of nearly as often in that part of the world is the construction of a modern high performance yacht. Such a construction project is the Didi Mini Mk3 of Hugo Vanderschaegh, proceeding apace in Dubai. This is a Mini 650 racer that is built from plywood. Designed primarily for amateur builders, this one is being built by professionals. The photos below show the hull with all flat sheets fitted and the radius skin starting, through to hull turning.

This boat is being built from a CNC kit that was supplied by our Cape Town kit supplier, CKD Boats. They are able to supply kits for most of our radius chine plywood designs as well as the classically-styled lapstrake designs.
Didi Mini Mk3, flat panels completed and 1st layer of radius starting.
2nd layer of radius almost finished.
Didi Mini Mk3 hull skin completed.
Clean and powerful stern sections.
Completed hull ready to turn over.
They turned Hugos hull right-way-up last week and recorded it on time-lapse video. They accomplished it with plenty of helping hands and no mechanical equipment. This is a wide boat, at 3m beam, so it towers above the men providing the muscle power. It worked in their situation with lots of hands but "dont try this at home". For the average builder it is better and safer to use mechanical equipment to raise one side under control then lower it again on the other side.

You can see more of his Didi Mini Mk3 project on Hugos website and follow future progress. Also visit our website at http://dixdesign.com/ to read more about our range of designs and available kits for our plywood boats.
Read More..

40 Years of Wooden Boats

Minggu, 14 Februari 2016

0 komentar
Dehlia and I are in currently soaking in the deep maritime history that is Mystic Seaport in Connecticut. We are here to exhibit our little Paper Jet skiff on the 23rd Annual Wooden Boat Show. We have been here every year since first showing her in 2007, when she won the Outstanding Innovation prize. As always, she is attracting a tremendous amount of attention and we just ride along on her coat tails, happy to meet and talk with those who stop by to admire her. She is just so different from everything else around her that she has to grab a few minutes out of the day from all who come by.

This years show is something special though. It also marks the 40th year of publication of Wooden Boat Magazine, a milestone that was celebrated at a big party at Latitude 41 restaurant last night. We were rubbing shoulders with many of the major characters in the sector of the boating industry that has anything and everything to do with boats built from wood. I say "characters" rather than "players" because most of these people are indeed larger than life characters when compared with much of todays bland, washed-out and politically correct world.
Masthead from Wooden Boat Facebook page.
My direct association with Wooden Boat does not go back anywhere near 40 years but it has been nearly 20 years and I have collected the magazine from long before that. I have visited their home in Brooklin, Maine, on a number of occasions, have met many of their staff on visits to the rambling mansion from which they produce their wonderful magazines and I have had close associations with a few of them for the past 10 years or so. We have become good friends in those years. They even flew me to Maine a few years ago to be a judge in their design competition, run in partnership with the sister magazine, Professional Boatbuilder.

I have come to see this organisation as a big, close-knit family. I did not realise how big, nor how close-knit, until last nights party. All of them were introduced to us and the function of each was described. Most have worked there for a very long time. Personally, I think it is the winter snow and ice that traps them there for part of the year and the exquisite beauty keeps them transfixed the rest of the time.

In all those years I have never known who was at the head of this place that produces such wonderful inspiration to everyone who loves wooden boats and creating beautiful craft from natures original engineering materials. It was quite funny how I found out who that person is and became lucky enough to meet him.

We were sitting at a big round table with about 8 other people, some known to me and some not. Steve White, the head of Mystic Seaport Maritime Museum, was MC and had been talking for awhile when I said to Dehlia that after all these years I still didnt know who owned Wooden Boat. Hardly a minute later Steve called on John Wilson, as owner of Wooden Boat, to come to the microphone. The man sitting just two seats away from Dehlia stood up.

John told us the fascinating story of the early years of Wooden Boat magazine. He told us of his incredible naivete, optimism and hard work that launched it. It was launched at Mystic Seaport at a boatbuilding course. On the strength of just two subscriptions sold to students at that course, he had 12,000 copies printed. The rest is history.

John told us how he could never have dreamed of how his magazine would help to revitalise such a deep interest in wooden boats as it has, how it has helped to bring back to life wooden boatbuilding and restoration country-wide. John inspired us with his passion for his company, his staff and his magazines.

Never one to stand back, when open mike time came and comments were invited, I had to say my bit. That was simply to point out to John that Wooden Boat had not only had that effect country-wide but had done so all over the world. This is a close group of people who produce magazines of the highest quality and which will forever be collectors items. Personally, I never throw away any copy of either Wooden Boat or Professional Boatbuilder. Dehlia knows better than to take her life in her hands by trying to throw out any copy that she may find lying around.

These magazines are great reading and wonderful for research. I look forward to receiving them for many years to come. Happy 40th birthday to Wooden Boat.
Read More..

The Rewards of Small Boats

Rabu, 10 Februari 2016

0 komentar
My good friend Larry Cheek has written an excellent lead piece entitled "The Rewards of Small Boats" published on Opening Day of the Boating season, in the Seattle Times Pacific NW Magazine. Larry, as you may know, is the author of "The Year of the Boat", which is one of my favorite books (especially chapter 14) <grin>

Read More..

Desert Island Boats 2

0 komentar
Contd from Desert Island Boats

I spent the better part of this week on a Bristol Channel Pilot Cutter sailing from Lymington to Brixham.
Whilst I lost a bit of the experience to the worst seasickness Ive ever had I did learn a lot about gaff rigs, which, after sailing, was the objective.

Here are some reflections:
Gaffs are easy to drop on peoples heads, heavy to haul up and fall away to leeward.
Gybing is even more dangerous than in a Bermudan rigged boat as the force of the gaff whipping round could bring the mast down. A preventer is essential.
Gaffs seem to require running backstays which add more time, people and rigging to any tack or gybe.

Bristol Channel Pilot Cutters were famously sailed by a man and a boy.
It took at least 5 of us to hold the boat on course, manipulate the mainsheet and sweat and tail the throat and peak halyards to raise the main.
I can only imagine that the boy was a four-armed chimp with a twelve foot reach.

If all this sounds sounds a bit negative then Im misrepresenting the trip. I had a great time. I dont usually sail with a big crew and the teamwork made the sailing even more rewarding. But having that many people on board does give one a lot of time to go in for some serious reflection! So heres some more:

Big bowsprits are a worry. Our skipper was concerned about burying the pole in a big swell, it gave coming alongside in a busy harbour a certain piquancy and because it didnt steve or retract it contributed to the overall length which increases mooring fees but doesnt add speed through waterline length.

Cutter rigs are good. They help you balance the boat. Without the jib set there was considerable weather helm. Raise the jib in front of the staysail and it balances the boat. But if youre worried about burying the bowsprit are you going to put a big bit of cloth, with all the extra strain, on the end of it? You could reef the main to balance the boat. Reefing could be easier. With that gaff and a tree trunk of a boom reefing in a swell could put someone in the drink.

So Im moving towards a Bermudan cutter, perhaps a yawl to reduce the size of the sails and make it easier to balance. A short, retractable, bowsprit isnt out of the question but Im not convinced. It would certainly spread the sail area fore and aft keeping it lower down which would reduce heel.

These are old quandaries, I know. Unfortunately so many sailors seem to advocate certain rigs so devotedly that its impossible to get a really objective analysis. The only solution is to sail them all oneself.

I need to find a double headed Burmudan ketch or yawl with no bowsprit for hire in the UK.
Read More..

Durable Boats Durable Men

Sabtu, 06 Februari 2016

0 komentar


Thats doryman Joes caption for this photo he sent me recently.

"Here is a current pic of my friend Don, beaching the boat he built in 1968, and has been using continuously since. Grumpy Don is approaching middle age at, I believe, 76 or 77 years old."

The Pacific Dory Fleet is alive and going strong.
Read More..

The Boats of Paul E Luke

Jumat, 05 Februari 2016

0 komentar

Here is the definitive list of all S&S designed boats built by Paul E. Luke of East Boothbay, Maine. They are listed by year, LOA, design number and name. All are active hyperlinks.

1957, 45-8", 1230, Mermaid

1957, 38-6", 1054, Delight

1958, 46-0", 1330, Madrigal

1961, 37-5", 1641, Nancy Sue

1964, 47-5", 1766, Duster

1970, 49-3", 1995, Challenge II

1972, 58-8", 2081, Shohola

1974, 45-6", 2192, Peregrine

1975, 55-5", 2100, Southerly

1977, 58-5", 2269, Sirona

1979, 50-10", 2365, Zimba

1981, 50-0", 2373, Palawan V
Read More..

Designs 363 366 Air Rescue Boats

Selasa, 26 Januari 2016

0 komentar
Design 363

Last week I posted an article about design #370, a World War II Air Rescue or Crash Boat, used to rescue downed pilots during the war. Here are a couple of more designs of the same type, designs #363 and #366, both designed in 1940.

Design 366

#363 was designed for Oxford Shipyard of Oxford, Maryland and #366 for the Seabrook Yacht Corporation of Seabrook, Texas. Multiple copies of each were built.

Principal Dimensions #363
LOA 29-4"
LWL 26-3"
Beam 8-7"
Draft 2-6"

Principal Dimensions #366
LOA 36-4"
LWL 34-3"
Beam 10-5"
Draft 3-6"
Read More..

Didi Mini Mk3 Kit from CKD Boats

0 komentar
I would have to dig deep in my files to find when CKD Boats first started cutting kits to our plywood designs. Owned by Roy McBride, this Cape Town company has the longest history of cutting our kits and has shipped kits for our plywood boats to many countries around the world. They also have the most experience with packaging large or small kits securely enough to arrive at their destination without damage or loss.

The most remote was a Didi 38 kit sent to Johnston Atoll in the North Pacific. It was a very comprehensive kit that included all plywood, complete rig, keel, engine, sterngear, galley equipment, deck hardware, pulpits, sails and even pre-cut window panels and all the cushions pre-upholstered. This was all packed into a standard 20ft container and had to be shipped via New Zealand and Hawaii, all expertly managed by Roy, his staff and his subcontractors.

CKD Boats has just completed cutting a kit for the Didi Mini Mk3 for a customer in France. It will be packed next week for shipping.
Didi Mini Mk3 sheet fresh from the CNC router.
The plywood components are held in place in the sheets by thin tabs that are left between the full-depth cuts. They are released from the sheets by cutting through the tabs with a box-cutter or jigsaw. This system keeps the plywood as full 8x4 sheets for easy packaging and protection of the components from loss or damage.
Didi Mini Mk3 hull skin panels with jigsaw joints.
The Didi Mini Mk3 is one of the first boats that I converted to jigsaw joints instead of the stepped scarph joints that we used previously. This results in easier assembly and is easier to cut, with less machine time involved. These two panels both show a narrow cut on one side and a wide cut on the other. The wide cut is at the junction between flat and radiused panels, so it has a half-depth rebate pre-cut full length of the panel for the structural joint of the radius panel to the flat sheet.

When this kit is out of the shop, the next will start cutting. This is for a Didi Sport 15 to fill an order from a South African builder.

To see these designs and others in our very broad range, please visit http://dixdesign.com/.
Read More..

Copyright © 2014 Boat Plans Mania | Powered By Blogger