Well ask him to tell the story...
"I was looking to build a performance pulling boat, something a step up from my Gloucester Light Dory and my search kept coming around to Firefly. Being new to boat building, I liked the simple plywood construction. I had successfully completed a 17 okoume/composite ocean kayak and looking at Firefly, it occurred to me that this hull was perfect for stitch and glue construction."
"I contacted Bassett and he gave me his blessing to proceed. Stitch and glue plans usually include plank expansions, a set of numbers that allow the builder to cut out the planks without setting up molds. Firefly did not come with expansions, so I had to begin by setting up the molds."
"From the mold I was able to take the four plank shapes and then proceed to stitch and glue them together. The plywood easily accommodated the twists required, no torturing involved. Though I did use 4mm okoume instead of the called for 6mm which would have resisted a bit more. I used 4mm because I fully fiberglassed the boat inside and out."
"I took a page from the Annapolis Wherry and added sealed tanks fore and aft both for stiffness and because I am a fan of positive flotation in a boat. The center frames are laminated Douglas fir. All the trim is Douglas fir. I have not weighed the boat yet, but I can easily carry it over my head."
"There is a bit more wood to add and more epoxy and paint, but I suspect the resulting boat will be quite a bit lighter than the original version. Im installing a salvaged and refurbished Alden Row Master for seat and riggers. Im shooting for a spring launch on the Connecticut River."
"My daughter built an Annapolis Wherry last summer. We are anticipating a double launch date. I’m curious to see how they compare on the water. I will send you photos."
Excellent job, dont you all agree? Well be looking forward to the launch, Lorenz. Thank you for the great photos!
0 komentar:
Posting Komentar